FG-100 DDS Function Signal Generator Frequency Counter 0.01Hz - 500KHz Signal Source Module

Frequency range: Sine wave 1Hz-500kHz (where the output amplitude is flat up to 200 kHz, and the output amplitude will decrease as the frequency further increases), other waveforms 1Hz-20kHz (but the upper limit of adjustable frequency is not limited. If there is no high requirement for distortion and shaking, the frequency can be further increased). Resolution: 1Hz. Sine wave distortion:Less than 1% below 1kHz,Less than 0.5% above 1kHz. Output amplitude: maximum ± 10V (P-P) Output impedance: 50 ohms. DC offset: maximum ± 10V, related to closing function. There are filters that can be turned on and off, which can adapt well to sine and pulse waveform outputs. Power supply: DC3.5-10V. When using an adapter, it is recommended to choose DC5V and use a 3.7V lithium battery for battery power supply Due to different batches, there may be differences in product appearance and printed text, which will not affect use Colour:As Shown Material:ABS Package Contents: 1 x Signal Generator kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.