Feature: 1. PRACTICAL AND DURABLE: Y strainer adopt stainless steel double layer network structure, which is strong and durable, possess low flow resistance, easy discharge and large pollution 2. SPECIAL DESIGN: Y type strainer body material is stainless steel, mainly used in small diameter piping equipment 3. INSTALLATION POSITION: Y type filter is an indispensable device in the conveying medium pipeline system, usually installed at the inlet end of the pressure reducing valve, relief valve and fixed water level valve; Can be installed vertically or horizontally 4. CORROSION RESISTANCE: Y strainer is suitable for SY11‑(16‑64) C water, oil, gas and other media, and has a good corrosion resistant effect on the corrosion of various chemicals 5. CONVENIENT MAINTENANCE: When it is necessary to clean the filter, as long as the detachable filter cartridge is removed, after removing the filtered impurities, can be re loaded, which is extremely convenient to use and maintain 6. PREVENT CLOG: Usually installed in the pressure reducing valve, pressure relief valve, fixed level valve and other hydraulic control valve or other equipment inlet end, used to remove granular impurities in the medium, free from blockage and damage caused by impurities, rust and welding chips in the pipeline, thus avoiding maintenance costs and production losses, to protect the normal use of valves and other equipment Specification: Item Type: Y Strainer Filter Type: Tubular Material: 304 Stainless steel Thread Size: 1/2in DN15 Nominal Pressure: 6.4MPa Strength Test Pressure: 9.6MPa Applicable Medium: SY11-(16-64) C Water, oil, gas, SY11-(16-64) P phosphoric acid, SY11-(16-64) R acetic acids Applicable Temperature: -29-180℃. Package List: 1 x Y Strainer