For DJI Ronin Motor/Followers Cable USB-C Cable Focus Pro/ LiDAR Multi-Function Connecting Cable 1m/3937inch USB-C TO USB-C Multi-Function Data Connection Cable Title: USB-C 1 line camera cable Multi-function data control cable for DJI Focus Pro grip LiDAR communication cable Specification Parameters: Applicable devices: DJI DJI Focus Pro handle, DJI Focus Pro LiDAR Support device: 1: USB-C cable connected to the follow focus motor can control zoom or follow focus 2: Plug into the RSS camera control port of DJI Focus Pro to control the camera to take pictures and videos. 3USB-C cable connects to the LiDAR port of DJI Focus Pro and Motor to realize the auto focus function of manual lens. 4: The USB-C cable can also be used on the RSS camera control port of DJI Ronin-RSC2/RS3/RS4 stabilizers to control the camera to take photos and videos. Camera models supported by USB-C cable for RSS camera control jack: for Sony :a7m3 a7m4 a7r3 a7r4 a7r5 a9II for Fuji:X-T3,X-T4 for Nikon:z5,z6 z7,z6II,Z7II,D780 for Panasonic:gh5,gh5s,s1h,s1 for Canon:R5 ,R6,EOS R,EOS RP,GX7 3 Cable parameters: Cable length: 100cm/1m/39.37inch Wire diameter: OD3.3mm Core: 8 cores Shielded wire Material: PVC cord Features: high temperature 80 degrees, low temperature -20 degrees can work normally, the line length is convenient for long-distance multi-angle shooting operations. No delay. _x000D_ Due to differences in shooting equipment, displays, and production batches, the product may have slight color differences. This is normal, please refer to the actual product. We have tried our best to restore the true color through professional equipment, but we still recommend that you watch it under natural light for the most accurate visual effect.