FlySky FGr4B 2.4GHz 4CH AFHDS 3 Mrico Mini RC Receiver PWM/PPM/ibus/S.BUS/ibus2 Output Compatible PL

79,00 $ CA
+ 13,99 $ CA Livraison

FlySky FGr4B 2.4GHz 4CH AFHDS 3 Mrico Mini RC Receiver PWM/PPM/ibus/S.BUS/ibus2 Output Compatible PL

  • Marque: Unbranded

FlySky FGr4B 2.4GHz 4CH AFHDS 3 Mrico Mini RC Receiver PWM/PPM/ibus/S.BUS/ibus2 Output Compatible PL

  • Marque: Unbranded
Prix de vente conseillé : 129,00 $ CA
Prix : 79,00 $ CA
Vous économisez : 50,00 $ CA (38%)
Verkocht door:
79,00 $ CA
+ 13,99 $ CA Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

FlySky FGr4B 2.4GHz 4CH AFHDS 3 Mrico Mini RC Receiver PWM/PPM/ibus/S.BUS/ibus2 Output Compatible PL18 NB4 NB4 Lite NB4+ for RC Car Boat Precise details: OVERVIEW:The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3). It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals. It supports all AFHDS3 transmitters. Description: Brand: FlySky Model: FGr4B PWM Channels: 4 RF: 2.4GHz ISM 2.4G Protocol: AFHDS 3 Antenna: Single Antenna Input Power: 3.5~9V Data Output: PWM/PPM/i-bus/S.BUS/i-bus2 Temperature Range: -10℃—+60℃ Humidity Limit: 20%~95% Online Update: Yes Dimensions: 17*29*16.6mm Weight: 6.4g Colour: Black Position: Front Model Type: Car/Boat ect Certification: CE,FCC ID: N4ZFGR4B000 Adaptive transmitter: all transmitters supporting AFHDS3 (PL18, NB4, NB4 Lite etc.) Binding: - Press and hold the receiver BIND button [5] while powering on the receiver ,release the BIND button after receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds , the LED [7] on the receiver will flash rapidly; - Put the transmitter into bind mode; - The binding process is complete when the LED on the receiver stops flashing and is on continuously. If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash slowly. Exit bind mode on the transmitter and if the receiver LED stops flashing and is on continuously, the binding process is complete. - Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise. Compatibility: The FGr4B receiver is compatible with all AFHDS 3 transmitters (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.) Package Included: 1 x FGr4B Receiver
  • Identifiant Fruugo: 307086160-687786797
  • EAN: 6901394880848

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Replacement must be performed with the assistance of a professional,Use of incompatible accessories and equipment may result in damage to the equipment.

Livraison & retours

Expédition dans un délai de 5 jours

  • STANDARD: 13,99 $ CA - Livraison entre mar. 28 octobre 2025–ven. 07 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Houshe E-Commerce
  • Shenzhen Houshe E-commerce CO,.LTD
  • Room 602, No. 14, North District, Jingle New Village, Longyuan Community,
  • Longhua Street, Longhua District,
  • Shenzhen,Guangdong,China
  • Shenzhen
  • CN
  • 518000
  • houshecommerce@163.com
  • 13760403804
  • https://www.fruugo.it/houshe-e-commerce/m-23355

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • SUCCESS COURIER SL.
  • SUCCESS COURIER SL.
  • CALLE RIO TORMES NUM.1,PLANTA 1,DERECHA,
  • OFICINA 3,Fuenlabrada,Madrid
  • Spain
  • Madrid
  • ES
  • 28947
  • successservice2@hotmail.com