Application FOR Lada Vesta(from 2015-10 to 2025-04)FOR Nian Almera(from 2013-05 to 2019-01)FOR Nian Atleon(from 2014-10 to 2019-09)FOR Nian Cabstar(from 2014-10 to 2020-03)FOR Nian Cabstar E(from 2014-10 to 2020-03)FOR Nian Evalia(from 2012-01 to 2020-09)FOR Nian Note(from 2004-09 to 2013-08)FOR Nian Note(from 2013-09 to 2017-12)FOR Nian NP300(from 2016-05 to 2024-09)FOR Nian NT500(from 2014-02 to 2018-12)FOR Nian NV200 Combi(from 2009-11 to 2020-09)FOR Nian Pulsar(from 2014-07 to 2018-12)FOR Nian Qashqai(from 2014-01 to 2016-09)FOR Nian Rogue(from 2014-01 to 2016-02)FOR Nian Sentra(from 2013-11 to 2017-09)FOR Nian Teana(from 2014-03 to 2019-01)FOR Nian Tiida(from 2012-01 to 2015-02)FOR Nian Tiida(from 2015-03 to 2015-11)FOR Nian X-Trail(from 2013-12 to 2016-09)FOR Renault Koleos(from 2014-01 to 2016-07) Selling Point Note1:Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. Note2:No sensor programming Required : The Tire Preure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : OBDII requiredInstallation of TPMS is recommended to be performed only by trained profeionals.SPECIFICATION :Replace For Part Number: 40700 5663R; 407003VU0A; 407003VU0BBattery Life: ABOUT 3YEAROperating Frequency: 433MHz PACKAGE CONTENT : NORMAL PACKET COMPREHENSIVE VEHICLE COVERAGE Installation Proce1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.