SPECIFICATION : Replace For Part Number: 52933D4100;52933-D4100;52933-F2000;52933F2000 Battery Life: ABOUT 3YEAR Operating Frequency: 433MHz PACKAGE CONTENT : NORMAL PACKET Application FOR Genesis G90(from 2017-04 to 2023-04) FOR Hyundai ELANTRA(from 2015-06 to 2021-08) FOR Hyundai GRANDEUR(from 2014-03 to 2017-07) FOR Hyundai GRANDEUR(from 2017-05 to 2023-09) FOR Hyundai I30(from 2018-08 to 2022-12) FOR Hyundai I30 FASTBACK(from 2018-03 to 2023-03) FOR Hyundai IONIQ(from 2016-06 to 2021-06) FOR Hyundai KONA(from 2017-09 to 2023-09) FOR Kia NIRO(from 2016-05 to 2021-09) FOR Kia OPTIMA(from 2015-09 to 2021-09) Selling Point Note1: Pls Use the vehicle fitment weve provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. Note2: No programming Required : The Vehicle Sensors Tire Pressure is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Simplified Relearn : OBDII required Installation ofis recommended to be performed only by trained professionals. COMPREHENSIVE VEHICLE COVERAGE Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the : With a screwdriver remove the fastening screw and from the Valve stem, then loosen the nut and remove the valve. 4. Mount and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. FAQ Q: Frequently of A: 433mhz Q: Did they need to make program A: The Vehicle Sensors Tire Pressure come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Q: Relearn Procedure A: Relearn Summary:OBD Relearn Relearn Description Inflate tires to correct pressure. Read all IDs and connecttool to OBDII port. Turn ignition on. Following the prompts, continue through the process until tool indicates relearn successful.