Features: 1.Protects cluster screen from scratches, dust, debris, heat and UV 2.Seals existing scratches underneath and makes the cluster screen like new again 3.Easy to clean and wipe the dirt off without the fear to scratch the cluster screen 4.Leave no residue when removed 5.Comes with Cleaning kit and Squeegee FITMENT: For KTM Duke 125 2017+ For KTM Duke 390 2017+ For KTM 390 Adventure 2020+ For KTM 790 Adventure /R 2019+ For KTM 890 Adventure /R 2020+ Description: Condition:100% New Quantity: 2 SETS In One Package Colour: As Shown Material: Thermoplastic polyurethanes(TPU) Package Inlcuded: 2 set in one package (with Cleaning kit and Squeegee) Installation: 1. Use the fiber cloth (clean and wet cloth) in the package to remove the dust and dirt on the speedometer screen 2. Spray an appropriate amount of water on the speedometer screen (it is best to use the mixed water of detergent and water, so that the position of the protective film can be well adjusted ). 3. Tear off the No. 1 surface film on the protective film, and then carefully stick the protective film on the motorcycle speedometer screen,After adjusting the position of the protective film, squeeze out the excess water and air with a hard card (small white card in the package). 4.after squeeze out the excess water and air,Wipe the moisture off the edge of the speedometer,Finally, tear off the No. 2 surface film on the protective film and complete the installation. (Note: please do not clear the speedometer screen within 3 days) (Due to personal craft problems, maybe a little bit bubbles is a normal phenomenon.) Note: