1This product is made of high quality copper, durable, anti-freezing, anti-aging 2It is equipped with stainless steel protective cover, which is not easy to be damaged and has a long service life 3The use method is simple, the water intake rod is inserted into the water intake valve, and the water can be taken by rotation 4Plug-and-play, pull-and-pull, without complex procedures 5The outlet is a dual-purpose thread, and the G1'' female thread and the G3/4'' male thread can be connected arbitrarily Features: This product is made of high quality copper, durable, anti-freezing, anti-aging. It is equipped with stainless steel protective cover, which is not easy to be damaged and has a long service life. The use method is simple, the water intake rod is inserted into the water intake valve, and the water can be taken by rotation. Plug-and-play, pull-and-pull, without complex procedures. The outlet is a dual-purpose thread, and the G1'' female thread and the G3/4'' male thread can be connected arbitrarily. The inlet of the copper valve body is G1'' female thread, wherein the water outlet of the valve stem is G1'' male thread and G3/4'' female thread dual-purpose thread. Specifications: Condition: 100% Material: Copper Installation type: external thread connection Working temperature: 1-60 Working pressure: 1.5Mpa Medium: water Scope of application: garden sprinkler irrigation Inlet of the copper valve body: G1'' female thread Water outlet of the valve stem: G1'' male thread and G3/4'' female thread dual-purpose thread Size: G1'' male thread diameter: approx. 32mm / 1.3in G3/4'' female thread diameter: approx. 25mm / 1in Water Intake Pole: approx. 16.6cm / 6.5in Quick Plug-in Valve: approx. 12.5x4cm / 4.9x1.6in Package list: 1 * Quick Plug-in Valve 1 * Water Intake Pole Note: 1. The water-drawing rod has no threaded end inserted into the valve body. The threaded end is water. It can be connected with a soft plastic tube and tied with a tube and wire. 2. Take the water stick slowly along the main valve body tab, slowly rotate it in the clockwise direction, and the water will be discharged from the water. After the water is finished, turn it clockwise and follow the chute to remove it. Take the water stick. 3. The valve body of the water intake valve is connected to the underground pipeline, and the valve seat is installed flush with the ground. When in use, open the upper cover, insert the cannula, the valve automatically opens, you can switch on the water source, and directly carry out the watering work. 4. The handle of the stem can lock the valve body.