The Gigabit PoE Injector/Converter provides a low cost solution for delivering power to an 802.3af 48 volt device (such as Cameras, Phones and WiFi access points) over 328ft of network cable. This scheme allows power to be carried on 10/100/1000 networks on CAT5E, CAT6 or CAT7 Ethernet network cable. power is any supply from 10v to 24v and the output voltage is 48 volts PoE. Ideal for solar conversions. Simple plug and play installation with Fast Charging 10/100/1000 Gigabit data capability, up to 328 ft. away from the power source. Works with your existing power source - Solar or DC, standard 2.1mm x 5.5mm DC female power input. The output voltage of 48 volts comes on mode A pins 3,6 + (plus) and 1,2 -(minus) of the female RJ-45 in order to power any 802.3af/at device. Model:GPOE-48V10W Connector Types:DC / RJ-45 Data Rate:10/100/1000 DC connector:5.5 x 2.1 mm DC Dimensions:25x50x150mm Input Voltage Range:12-24V DC or 24V Passive PoE Max Power for Kit:10 watt Max. Amps Per Port:0.2A output Output Voltage:48 volts PoE Method:Passive PoE Mode/Pinout: Input: Mode B (+4,5 -7,8) Output: Mode A (-1,2 +3,6) Operating Humidity: 5% to 90% Operating Temperature Range: -10-60℃ Due to different product batches, the appearance , which does not affect the use. Colour:Black Material:Plastic Package Contents: 1 * Gigabit PoE Injector PoE Converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.