Soria Natural Green Clay is indicated for softening and purifying the skin. It can be used in masks, poultices, and baths. *The packaging received may be slightly different from the image on the product sheet. It is recommended in External use Facial Mask: It is advisable to put a tablespoon of green clay in a suitable container (not metallic or plastic) and gradually add mineral water or infusions, until the desired consistency is obtained. The mask should be of a firm consistency so it doesn't run, but it shouldn't be made too thick either. Apply a thin layer to the face and neck, avoiding the eye and lip contour, let it act for about 10 minutes and remove with lukewarm water before it dries completely. Later you can apply a moisturizer. Body Poultice: Spread the clay with the desired consistency over the area to be treated (it must cover a larger surface than the one to be treated) and distribute it with a non-metallic spatula, with a thickness of approximately 1 to 2 centimeters. The poultice should be of a firm consistency so that it does not drip, but not too thick either. Apply the poultice, leaving the clay in contact with the skin, and keep it with a bandage or a dry cloth, without squeezing too much. If the poultice is used on an irritated area, put a thin gauze between the clay and the skin. When the poultice is almost dry, remove it and remove the remains of clay with warm water, then dry the skin with a cotton towel. Baths. Baths can also be done to soften the skin: Pour 2 to 4 tablespoons of clay into a large glass, add mineral water and stir with a non-metallic spoon. Then add the mixture to the bath water. At a general level, the traditional treatment is recommended to perform two to three baths a week for 21 days, repeating if necessary with a rest period of one week. It is recommended to do it in a tub or tub and not in the bathtub as the mud clogs the drains.