Feature: 1. Mainly used in small processing machinery such as grinding machines, milling machines, drilling machines, lathes, etc. 2. Possess low power loss. According to the working principle of electromagnetic induction 3. Small size occupy less space, contain complete accessories, easy to assemble and work when powered on 4. Suitable for professional lubrication or cooling of machine tools. Can be used continuously 5. Possess high mechanical performance, can be matched with a flow adjustment valve, and the discharge flow will change due to the length of the oil outlet pipe and the viscosity of the oil Specification: Item Type: Grinding Machine Electromagnetic Oil Pump Material: Stainless steel Uses: Suitable for small processing machinery (such as lathes, milling machines, grinders) Specification: AC220V Imported from Taiwan, ChinaPower: 13W Inlet Suction: 40KPa Spit Pressure: 1kgf/cm² Discharge Volume: 400-500cc/min How to Use: 1. While replacing the oil pump, please clean up the wastes such as residues in the grease, iron filings. This will protect the oil pump and keep it from breaking for a long time. If wastes such as residues and iron filings are not cleaned up before replacement, the oil pump will suck in, which will cause the operation to stop, or even burn the oil pump in severe cases. 2. When a new oil pump is installed for the first time, sometimes the oil pump makes a noise and does not supply oil due to the air in the pump core. At this time, the oil should be injected manually from the inlet of the oil pump when the power is turned on. Just help the air in the oil pump to discharge. . Package List: 1 x Grinding Machine Electromagnetic Oil Pump1 x Filter 4 x Connector2 x Clamp1 x High Pressure Pipe Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.