H2000 Air Painter Small Air Spray Painter High Atomization Handheld Paint Sprayer

Features 1. Gravity Type: The air spray painter adopts gravity type feeding mode, which can ensure the utilization rate of paint, save dyes and avoid waste. 2. Free Adjustment: According to the paint flow, adjust the feeding screw plug to control the process of sprayer needle, and freely adjust the size and flow of paint. 3. Adjust Range: The size and width of the atomization spraying range can be adjusted according to the spraying range to achieve a complete spraying effect. 4. Easy to Use: The sprayer has the advantages of simple installation, convenient use and simple operation. It is suitable for novices and is a good helper for you. 5. High Quality: The air painter is made of high quality aluminum, copper and stainless steel, which is durable. The capacity of the watering is100ml, with sufficient capacity to meet your needs. Specification Item Type: Air PainterMaterial: Aluminum, Copper, Stainless SteelProduct Size: Approx. 25 x 11cm / 9.8 x 4.3in Weight: Approx. 353 g / 12.4 ozCaliber: 1.0 mm / 0.04 inPot Capacity: 100mlRecommended Painting Pressure: 3.0barFeeding Mode: Gravity TypeRecommended Spraying Distance: 16-25cm / 6.2-9.8 inAir Consumption: When the air inlet pressure of painting is 2.0bar, the air consumption is 270L / minMaximum Intake Air Pressure: 10.0barCharacteristic: HVLP type and high atomization low pressure nozzle: High pressure and low pressure, High spraying efficiency, Saving paint, Protecting the environment31142200326 How to Use Usage method: 1. Before spraying for the first time, the residue in the coating channel shall be cleaned first, the release material shall be added into the sprayer pot, and the interior of the sprayer shall be filtered as much as possible to ensure cleanliness. 2. Adjust the appropriate spraying air pressure during spraying. 3. During spraying, control the angle and distance between the spray sprayer and the spraying parts. After pulling the trigger before pre spraying, the first gear can be used for dust blowing. 5. The paint flowing through the nozzle in the second gear runs through the train, and the pre sprayed air is atomized at the same time. 6. According to the paint flow, adjust the seasoning screw plug to control the process of sprayer needle, and freely adjust the paint flow. 7. According to the spraying range, adjust the size and width of atomization spraying range to achieve complete spraying effect. 8. After use, clean the air flow cap injector (first pour out the paint in the sprayer, then add the diluent, and then pull the trigger while shaking to make the residual paint inside the sprayer spray out as much as possible. Then remove the air flow cap for cleaning. If the air flow cap is too dirty, soak the diluent for a period of time before cleaning. Pay attention not to damage the hole on the air flow cap. After removing the air flow cap, protect the nozzle from being damaged. If the cleaning is not clean, the nozzle will be damaged and the air flow cap hole will be damaged atomization effect. Package List 1 x Air Painter1 x Sprayer Pot1 x Brush1 x Pagoda Shape Connectors1 x Accessory1 x Nut1 x Manual