Feature: 1. 2 Channels: This oscilloscope features 2 channels, 180MHz bandwidth, with a minimum measurement range of 10mV/div, 500MSa/s sampling rate, and an advanced digital trigger system. 2. Wide Application: This oscilloscope can be used for chip debugging, automobile repair, home appliance repair, DIY debugging, electronic competition, power supply debugging, frequency converter and so on. 3. Multiple Waveform Output: The bottom of this oscilloscope can output a variety of 2.5V amplitude waveforms such as sine, square, triangle, half wave, sine wave, etc., of which the frequency adjustment range of sine wave is 0 to 10MHz, and the frequency range of other waveforms is 0 to 2MHz, and the accuracy can reach 0.1Hz. 4. 14 Measurement Options: This oscilloscope has 14 measurement options such as Frequency, P to Pixel, duty cycle, amplitude, RMS, average, period,pulse width, maximum, minimum, top, base, and built in ARM and FPGA. 5. FFT Display Function: This oscilloscope has an FFT display function that allows you to analyze the spectral characteristics of the signal. Specification: Item Type: Oscilloscope Material: ABS Model: For DPOX180H Interceptor Output: Support 20M Hardware Bandwidth Limit: Support Cursor Measurement: Frequency, Period, Amplitude Z00M Scaling Time Base: Support Digital Fluorescence Technology: Support Adjustable Automatic Bandwidth Limiting: Support Color Temperature Display Technology: Support Scroll Mode: Support X Y Mode: Support Auto Adjustment: Support Waveform Manager: Support Number Of Channels: 2 Analog Bandwidth: 180MHz Maximum Sample Rate: 500MSPS Input Coupling: DC/AC Rise Time: 1.8ns Memory Depth: 120Kpts Input Impedance: 1MQ 18PF Vertical Sensitivity: 5mV-10V (1X) Time Base Range: 5nS-50S DC Accuracy: ±2% Time Accuracy: +0.01% Trigger Architecture: Digital Trigger Trigger Mode: Auto, Single, Regular Trigger Edge: Rising Edge, Falling Edge Test Range: 40mV-80V (1X) Screenshot Storage: 90 Intercept Wave Signal: 500 High Voltage Anti Burning: All Gears Voltage Resistant 400V Screen Size: 2.8 Inches Screen Resolution: 320 x 240 Screen Display: Process IPS Full View Expansion Interface: USB Transmission Interface Automatic Shutdown: 5 Minutes-2 Hours Firmware Upgrade Support: ISO Image Upgrade Charging Requirements: 5V-2A Standby Time Full Charge: 3-4 Hours Parameter Measurement: 12 Types Body Size: Approx. 135 x 90 x 40mm / 5.31 x 3.54 x 1.57in Signal Generator: 14 Standard Function Signals Waveform Storage: 250 Groups Remarks: ( Shipped With Built In Battery ) ( EU Plug 100-240V ) Battery Type: Lithium Battery Battery Capacity: 3000mah. Package List: 1 x Oscilloscope2 x 200M Probe1 x Charging Head1 x USB Cable1 Set x Accessories2 x Manual