Feature: 1. Smart Working: The air volume is adjustable, and the temperature is also adjustable in 280℃~480℃, ensuring quick heating, soft flows, low working noises, and constant temperature as well. 2. Clear Display: PWM digital temp control enables easier operation, while the LCD digital display with 1℃ resolution makes the adjustment much more convenient, very efficient and reliable. 3. Broad Utility: Can be applied for soldering and desoldering of various components, mobile phone cables and cable holders, heat shrinking, drying, thawing, preheating, plastic welding, etc. 4. Simple to Use: Equipped with magnetic sensitive sensor, the hot air gun will quickly enter working mode once picked up, which will also quickly enter shut down mode when put on the bracket. 5. Better Design: Plug in heating core largely simplifies the replacement, and the brushless ball bearing motor has a long service life. The lightweight heat gun is very easy to carry. Specification: Item Type: Hot Air Gun Material: Flame Retardant BPT Material Power Consumption: 450~700W Motor Type: Brushless Ball Bearing Motor Motor Life: >10000 Hours Airflow Type: Brushless fan, soft flows. Air Flows: 80~160 litres/min (maximum) Temperature Adjustment Range: 280℃~480℃ Display Form: LCD Display (resolution 1℃) Welding Gun Wire Length: Approx. 150cm / 59.06in Holding Position Diameter: Approx. 48mm / 1.89in Maximum Body Diameter: Approx. 67mm / 2.64in Body Length: Approx. 300mm / 11.81in Noise: Less than 45db. Working Environment: 0~40℃ Storage Environment: -20℃~80℃ Storage Humidity: 35%-45%. Package List: 1 x Hot Air Gun4 x Nozzle1 x Bracket1 x User Manual Note: When using this machine, the following basic measures must be followed to avoid electric shock or harm to human body, and to avoid the hazards of fire and other phenomena. 1. In order to ensure person safety, please unplug the power cord after the machine has finished working. 2. The parts approved or recommended by the original factory must be applied, otherwise serious consequences will incur. 3. Machine failures must be repaired by professionals. 4. After the hot air gun is turned on, its temperature may get above 400℃. Do not use near flammable and explosive gases and objects. The nozzle and the hot air it emits are very hot and can burn the human body. Do not touch the heating pipe or spray the hot air directly on the human body. 5. Before turning on the hot air gun, please ensure that the hot air gun is in a safe state. The operator must not leave the workplace after the gun is turned on. 6. When installing the nozzle, it cannot be installed when the hot air gun is turned on. It must be installed after the heating pipe and the nozzle are cooled. 7. Please keep the inlet and outlet air outlet of the machine unblocked, and there should be no blockages. 8. After use, remember to cool down the body, put the welding torch back on the bracket, and turn on the machine after it goes to sleep. 9. It should be handled with care, and do not vibrate strongly or strike the heating torch. 10. There will be smoke during welding, please make proper ventilation facilities.