Household Appliances Controller 2-Way Wireless Power Outlet Remote Control Socket

To achieve non-contact remote control of the controlled target, it is widely used in home appliances, light and so on. The wireless remote control socket has low installation cost, increased flexibility and reduced maintenance cost. Support self-locking working mode and interlocking working mode, the is more convenient, the use is more practical. Condition: 100% Brand New Item Type: Wireless Socket Material: PC Maximum Load: less than 2000W Remote Built-in Power Supply: CR2032 Button Battery 215mah (Included) Product Size: Approx. 11 x 5.7 x 6.5 cm Celsius 4.3 x 2.2 x 2.6 in Weight: Approx. 160g Celsius 5.6oz Instructions: 1. In the self-locking working mode: it learns the matching with the same button on the remote control. Press the same button once to turn it on, and then press it again to turn it off. 2. In interlocking working mode: it is to learn the with two different keys on the remote control, press one key to turn on and press the other key to turn off. 3. Scope of Application: The wireless remote control socket refers to the non-contact remote control of the controlled target, which is widely used in the field of home appliances and light. Compared with wired and infrared equipment, wireless remote control and wireless systems increase the degree of movement. As a result, more and more wireless remote control equipment and wireless systems are used in the industrial field. The advantages over cable connections are low installation costs (no wiring, no underground works, no cable troughs), increased flexibility and reduced maintenance costs. The wireless socket does not require point-to-point and can be used through wall. 5. clearing : (please clear the firstly and then match the when you need to change the working mode) Press and hold the learning key on the remote socket interface for about 15 seconds, and the learning indicator will turn on and off to indicate that the are successfully cleared. 6. Interlocking learning matching : after pressing the learning button for about 3 seconds, the learning indicator on the remote socket interface lights up, release, immediately press any button on the remote control (or unlock key), and then press another key on the remote control (or lock key), the learning indicator flashes three times and turns off, indicating that the learning is successful.