Feature: 1. Say goodbye to the buttons, release your hands, and the side-sensing type stretches out and outlet water, which is different from the traditional button-type pumping and oxygenating pump. 2. Oxygen is released instantly, with a amount of air, without fear of air volume decrease caused by water depth.3 LED bait lights: When mixing bait with pumping function, you can see how much water is added at a glance. 3. The sound is small, only 40 decibels at work.3 fixed modes: Can be used to hang on a of fishing accessories such as bait boxes, fish guards, fishing buckets, etc. 4. In addition to oxygen aeration, you can also change the water: Change the water at any time to give the fish a clear water environment. 5. Triple filtration: The pumping filter adopts small round to filter most of the impurities in the water and then pass through the fine wire mesh to block , making the extracted water more clear. Specification: Function: Oxygenation, Pumping, Lighting Battery Capacity: 2600mA Current: DC AC Capacity: 6L/Min Pumping Height: 1.8m/5.91ft Aerobic Battery Life: 6H Lighting Life: 36H Mode Description: Smart Mode: Long Press the water outlet button for 3 seconds to enter the smart mode. and the red light will be on. Covering the sensor light on the side with your hand or other objects will turn off or turn on the water outlet. At this time, pressing the water outlet button can also close or open the water outlet. That is: the smart mode is to activate another switch button for the water outlet, turn off the sensor light, and press the water outlet button. Lighting Mode: Press the upper bait light switch button 1 time to turn off or turn on the light. Water Discharge/Aeration Mode: Press the water switch button to turn off or turn on the water discharge/aeration. tip: Neutral Material: plastic colour: green Package Contents: 1 x Oxygen Pump Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.