Item Type: LED Kit_x000D_ Material: PCBA_x000D_ Applicable: For XBOX ONE S_x000D_ Operation Method: _x000D_ Turn on and off the LED light board: press and hold the "View button + Menu button" for 5 seconds._x000D_ Set LED light board: press and hold "View key" for 5 seconds, when "View key" and "Menu key" white LED light flashing means enter setting mode._x000D_ In the setting mode, press the "Menu key" of the handle to change the light mode._x000D_ Hold down the "View key" for 5 seconds to lock the mode._x000D_ Parameters: _x000D_ 1. Easy to install, open your controller, paste and insert, no need to solder. Push button control, easy to operate._x000D_ 2. Includes clear d-pad, thumbstick, start, return and ABXY buttons. Also comes with a complete tool for removing the controller.1Perfect Fit: The LED kit is only compatible for Xbox One One S, controller (model 1708), not compatible for Xbox One Elite controllers. 2Fixed Single Color And Single Color Slow Flash: The LED kit has multiple colors, such as blue, green, red, pink, light blue, purple, yellow and white. 3Multiple Modes: Cyclic fast flashing, cyclic breathing flashing, cyclic fading. 8 kinds of flashing colors, 19 kinds of light change mode. 4Easy to Use: This LED light board does not need to be soldered, it can be used by pasting. 5Notice: If the light is dim, or even does not work, please replace the battery with a new one, or try again with a fully charged battery. 1 x Light Board 1 x Light Board Connection Cable 1 x Cross Key 2 x Mushroom Cover 4 x Button 1 x Menu Key 1 x View Key 8x T8 Screws 12 x T6 Screw 1 x T8 Screwdriver 1 x T6 Screwdriver 1 x Plastic Pry Bar 1 x Plastic Tweezers 1 x Manual