Surpa Hobby LED programming card for RC car 25A/35A/45A/60A/80A/120A/150A brushle ESC electronic speed controller programme Note:Surpa Hobby LED programming card for Surpa Hobby brand brushle ESC 25A/35A/45A/60A/80A/120A/150A ESC electronic speed controller programme,Not compatible with other brands of ESC Brand: Surpa HobbySize:61*48*6mmweight:20gSuitable for:25A/35A/45A/60A/80A/120A ESC Programme card appearance description: 1Low Voltage Cut-Off:The function is mainly to prevent the lithium battery packfrom over discharging. When using lithium battery pack, please set the suitablevalue for low-voltage protection as your like.WARNING: Never use the default valueNon-protection for lithium battery! 3.1V2.9V2.7VNon-Protectiondefault value 3.1V23 start modes (Also called Punch) from softto very aggreive defaultvalue Medium3Maximum brake force: 25A45A60A50%25%75%100%default value 50%80A120A25%50%75%100%default value 25%4Maximum reverse force:25%50%75%100%default value 25%5Neutral range: 9%(narrow)6%(Normal)12%(Wide)default value 9%programme card Method1. Connect BEC wires with the programmer then turn on the ESC.80A120A pre thekeys to be not put2. The Green LED flashes for 2 times then LED off, that is, the connecting program cardwith ESC is succeful, and the Red LED on presents the current value of that item.Otherwise, the connecting is failed.3. Please pre the Key to select different programs4. Please pre the Key to select different value of the current program5. Please pre the Key Program to confirm above selections, the Green LED onimmediately and has gone out within 5 seconds, that is, this proce is succeful.6. Please pre the KeyReset to reset the factory setting. Notes:Please allow slight dimension difference due to different manual measurement.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!