1. Adjustable sandblasting flow and replaceable nozzle. 2. Self-contained material shell, large capacity, and convenient loading. 3. The air inlet interface is equipped with a filter to prevent clogging. 4. The all-aluminum body is , handheld and easy to operate, fast and even, and saves materials. 5. Uses: Specially used for various light and small metal dead corners, polishing, burrs, rust removal and detail finishing. This sandblaster can help you reduce unwanted materials such as rust, paint, oil, and other persistent spots. It is not only portable, but also easy and convenient to operate. So whether you need to clean a rusty, dirty or just simply wipe some metal parts, this tool get the faster and with a lot of efficiency. Sand can be used for general conventional sand, corundum, emery, glass beads, etc., 46-100 mesh can be used. Using pressure:70-150 PSI Air consumption:7.0scfm, 198l/min No-load speed:6000RPM Air inlet:20 filter, 1/4Inch Abrasive size:46-100 Nozzle size:2-15/16Inch L x 7/32Inch DIA Tips:The picture is a high-definition rendering. The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:As Shown Material:Plastic+Metal Package Contents: 1 x Sandblasting Set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.