<p>Product name: Magnetic control door <br/>Battery life: 500 times rechargeable<br/>Input voltage: 5V<br/>Charging time: It is recommended to charge once every 2-3 weeks<br/>Battery capacity: 400mA<br/>Number of lamp beads: highlight LED lamp beads<br/>Charging time: 40min<br/>Specifications:<br/>1.Magnetic induction door lights up when the door is opened, 6 high-brightness LEDs, magnetron ;<br/>2.Induction switch design, open the door and the door is on/off when the door is closed, the door is automatically turned on, and the ground is irradiated with a clear view to avoid stepping on splashing puddles or gravel and causing feet;<br/>3.Door lights, illuminate the ground and open the door at night, and temporarily stop and open the door, illuminate the ground to warn the rear vehicles/pedestrians on the road to improve driving safety;<br/>4.6 LED high-definition lamp beads, built-in high-brightness lamp bead protective cover integrated design, stable performance and not easy to fall off;<br/>5.Mini and compact, does not affect the opening and closing of the door, fits the four-part original car structure design, free opening and closing of the door, suitable for most models;<br/>6.Multi-scene installation, co-, storage box, can be installed in the central control armrest box, co-storage box, home cabinet, etc;<br/>7.Without fear of rain, the casing is tightly designed to prevent rainwater from penetrating into the interior, which effectively protects the inner control panel and prolongs the service life of the lamp;<br/>8.USB charging for long-lasting battery life, built-in large-capacity battery has long standby time and durability.<br/>9.Stick and use non-destructive installation, convenient installation design.<br/><br/>Note:<br/>1. As we all know, different computers display colors differently, the color of the actual item may vary slightly from the following pictures.<br/>2. Please allow 1-2 cm measurement deviation due to manual measurement.<br/><br/>Installation Method:<br/>1. Wipe the bottom of the door with a towel or paper towel<br/>2. Tear off the light/magnet adhesive<br/>3. Paste on the corresponding positions respectively (Note: The magnet needs to be accurately corresponding to the middle induction rod)<br/>4. After the paste is completed, the door opens and the door turns off.<br/>Package Included:<br/>Door *1/2/4<br/>Charging cable<br/>Car-mounted double-sided tape*1<br/><br/>Magnet sheet*1/2/4</p>