Black Furniture Sticker Color: Black. Size: 40X100cm. (2 pieces) The surface has a frosted texture, simple and beautiful Black Furniture Stickers: Just peel and stick! Can be applied to most planes. It can be used as a quick and economical solution to update the surface of an object Black Furniture Sticker: The furniture sticker is suitable for most rooms in any home, its surface is waterproof and easier to clean Black Furniture Sticker: There are grid lines on the back of the furniture sticker. You don't need to use any tools to measure the length. It's easy to use Matte surface Thickened opaque substrate Repositionable Easy to install and apply Water and oil resistant, easy to clean Protect furniture and repair areas Sticky wall wallpaper You can cut the wood tape into any size and shape you need. The wallpaper is self-adhesive and can be pasted by tearing off the bottom paper. Waterproof design to protect walls and furniture. The adhesive vinyl can be attached to walls or furniture without worrying about falling off. Give your room the most modern and fresh design. Follow the installation steps below to easily achieve the desired appearance: 1. Cleaning: Clean the surface thoroughly to ensure there is no dust or dirt. Wait for the surface to dry completely before using the adhesive film. 2. Measuring and cutting: Use grid lines to cut the adhesive film to the required size. It is recommended to leave a 3 cm margin on each side for future adjustments. 3. Coating: Start gently peeling off the backing from one side and at the same time apply the film to the surface inch by inch (note! Please do not remove the entire liner at once). 4. Flattening: Remove any air bubbles when coating the film with a cloth, rag or card. 5. Enjoy: Use a utility knife to trim off the excess edges and enjoy the new beautiful film surface. Please note: Paste the sticker on the surface and cut it to be 2 cm larger than the actual surface size. Slowly and gradually peel off the backing paper. If there are wrinkles after pasting, they can be slowly removed and then re-pasted.