MH MX8 Module Wireless for Bluetooth Audio Receiver Board Lossless Decoder Kit M18 M28 M38(M18

Feature: 1. M18: MUTE mute control terminal: used to control the power amplifier board. When muting, MUTE outputs a high level of 3.3V, and outputs a low level during playback. KEY button control: This function requires additional connection of resistors and buttons to achieve Volume power off function: The default output is 100percent volume. Press the button to control the volume increase and decrease. If the control volume is less than 15percent , the volume output will be 15percent after power?on; if the control volume is greater than 15percent , the original volume will remain unchanged after power?on. 2. M28: Power supply: It can be directly powered by the MICRO USB for Android cable 5V, or it can be connected to a 5V power supply or a 3.7V lithium battery. Audio output: The earphone can be directly connected to the 3.5mm audio interface, or it can be wired for the audio input of the power amplifier board. 3. M38 Power supply: It can be directly powered by the MICRO USB for Android cable 5V, or it can be connected to a 5V power supply or a 3.7V lithium battery. The maximum working current is 5V2A. It is recommended to use 5V2A regulated power supply for better sound quality. Support USB sound card, free drive (plug and play) Connect the module to the computer with the USB cable, and the computer can play music through the module amplifier output. 4. For Bluetooth V4.2 version of for Bluetooth automatic technology, supports WAV WMA FLAC APE MP3 lossless decoding, stereo twochannel output 5. After powering on the module, the phone searches for the for Bluetooth name MH?M18 MH?M28 MH?M38, and can play music when connected to for Bluetooth. 6. Widely used in various for Bluetooth audio receivers, DIY conversion of various sounds, etc. Specification: Item Type: Module Function model M18 M28 M38 MICRO power supply No Yes Yes Audio headphone Interface No Yes No Builtin amplifier No No Yes(5W+5W) Lithium battery powered Yes Yes Yes Support USB sound card, free drive No No Yes Volume memoryadjustment Yes No No MUTE mute interface Yes No No Button extension Yes No No for Bluetooth version For Bluetooch V4.2 Support for Bluetooth protocol HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2 Format support Support WAVWMAFLACAPEMP3 undecoded, stereo twochannel output Operating Voltage 5V3.7V4.2V Not connected Broadcast state 5.5MA Connection work state 20MA Deep sleeping 3UA Transmission distance 20 meters (empty or low interference environment) Operating temperature 40C to +85 degrees C Sensitivity 87dbm MHM18:. Number Pin Description 1 KEY Button control terminal (4 button functions, additional resistance required) 2 MUTE Mute control terminal (output high level 3.3V when muting, output low level during playback) 3 VCC Positive power supply 5V (lithium battery 3.7V power supply requires short circuit diode) 4 GND Negative power supply 5 L Left channel output 6 R Right channel output MHM28: Number Pin Description 1 5V Power positive 5V 2 GND Negative power supply 3 VBAT Lithium battery positive 3.74.2V 4 L Left channel output 5 R Right channel output 6 AGND Audio ground MHM38: Number Pin Description 1 5V Power positive 5V 2 GND Negative power supply 3 VBAT Lithium battery positive 3.74.2V 4 L+L Left channel output (direct speaker) 5 R+R Right channel output (direct speaker) Blue Module: The light blinks when for Bluetooth is not connected The indicator light usually lights up when for Bluetooth is connected For Bluetooth appears during playback, slow flashing Package List: 1 x ModuleM18: MUTE mute control terminal: used to control the power amplifier board. When muting, MUTE outputs a high level of 3.3V, and outputs a low level during playback. KEY button control: This function requires additional connection of resistors and buttons M28: Power supply: It can be directly powered by the MICRO USB for Android cable 5V, or it can be connected to a 5V power supply or a 3.7V lithium battery. Audio output: The earphone can be directly connected to the 3.5mm audio interface, or it can be wi M38 Power supply: It can be directly powered by the MICRO USB for Android cable 5V, or it can be connected to a 5V power supply or a 3.7V lithium battery. The maximum working current is 5V2A. It is recommended to use 5V2A regulated power supply for bette For Bluetooth V4.2 version of for Bluetooth automatic technology, supports WAV WMA FLAC APE MP3 lossless decoding, stereo twochannel output After powering on the module, the phone searches for the for Bluetooth name MH?M18 MH?M28 MH?M38, and can play music when connected to for Bluetooth.