TF (micro-SD) to Adapter Card with Standard 2.5-inch Hard Drive Case for Industrial Embedded Mobile SSDs Main Features: TF cards offer compact size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, and zero noise and errors. They are a popular mainstream memory card. This adapter card converts TF (micro-SD) cards into SSDs with 15-pin + 7-pin interfaces. Applications: Industrial computer motherboards, industrial computers, tablets, soft routers, POS machines, and DVRs. Main Features: Taiwan S682 solution. Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10, and LINUX operating systems. Flexible, removable SSD for industrial use, allowing you to use TF cards as a mobile hard drive for flexible data storage. After the hard drive is converted, it can be used as a system boot drive or a data drive. TF cards support high-speed cards. TF cards currently support a maximum of 128GB, with no theoretical upper limit. Compatible with GEN1 and GEN2, with transfer rates of 1.5Gbps and 3.0Gbps, respectively. Data transfer rates reach 150MB/s and 300MB/s, respectively. Supports edge-drilling. Simply create a slot in your device's chassis that aligns with the TF card slot for portable TF storage. Working with the BIOS and , it supports hot-swapping of and TF cards, enabling plug-and-play operation without the need for any drivers. When hot-swapping a TF card, that the BIOS, , and application are properly coordinated. Avoid hot-swapping during data reading and writing to avoid data loss. Cold-swapping is generally recommended for portable data storage. Dimensions: Compatible with 2.5-inch and 3.5-inch hard drive interfaces. The bare board conforms to the half-slim form factor. The enclosure fits a standard 2.5-inch hard drive case. Can be used in desktops and laptops. Notes: Before using this product, please insert a TF card into the corresponding TF socket, then connect the power and data cables to the host device. After powering on, the LED flash, indicating that the TF card data is being read normally. Before initial use or after changing the TF card configuration, the TF card must be initialized and formatted. After formatting, you can perform any data operations on the TF card. Color: As Shown Material: PCB Package Contents: 1 * TF to Adapter Card Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.