Mini Static Grass Applicator with Precise Flocking Control and AntiSlip Handle for DIY Model Scenery

Mini Static Grass Applicator for SmallScale Flocking Projects Key benefits Comfortable, portable tool for precise flocking on small surfaces. Strong electrostatic attraction holds flocking fibers upright for realistic grass effects. Low power dissipation in the handle with a output voltage for efficient operation. Sturdy ABS construction ensures durable performance and consistent flocking results. Main features Compact, nonslip handle sized for comfortable singlehand use. Designed for 3 to 5 mm flocking powder. Solid ABS body with reliable flocking power to secure static grass in place. Lightweight and easy to carry for onsite or tabletop work. Typical applications Model railways and dioramas: add realistic grass to trackside scenes and scenic bases. Architectural sand table and scale model landscapes: create lawns, fields, and groundcover for presentations. Wargaming terrain and miniature bases: apply precise patches of static grass for realistic battlefields. How it works 1. Install batteries in the applicator battery compartment and confirm internal wiring makes contact with the mesh. 2. Open the mesh cap and add flocking powder, keeping the fill level below 5 mm. Tighten the cap. 3. Apply white latex or adhesive evenly to the target surface and allow to become tacky. 4. Touch the negative terminal to the target surface, then hold the applicator 2 to 3 cm above the surface and spray the flocking powder. The electrostatic charge helps fibers stand upright. 5. After flocking, pour any remaining powder back into its container or tap excess off, then gently vacuum or brush away loose fibers from the model and work surface. Package contents 1 Brush 8 packs static grass, total 240 g, four colors 1 Static Grass Applicator 1 Instruction manual Notes and compatibility Suitable for 3 to 5 mm static grass flocking powders. results on small to medium areas and detailed terrain where precise control is required. Keep the applicator clean and dry when not in use. Follow the included manual for battery installation and maintenance.