Motor Controllers, DC Motor Control Module 10A Motor Forward Reverse Controller with Remote Control DC12‑24V

Features [Wide Voltage Input] Working voltage is DC12 to 24V, rated current is 10A (maximum instantaneous current is 30A). Recommended maximum power at 12V voltage is 250W, and at 24V voltage, it is 350W. [Remote Control] The remote control module has high receiving sensitivity, allowing signal to pass through wall, floor, door, can achieve a maximum control distance of up to 50 meters in an open environment. [Two Modes] The jumper cap allows for easy selection between momentary mode and self lock mode, providing flexibility and ease of use. [Safe and Reliable] This DC motor control module is equipped with a protective housing, ensures safety and reliability during operation. [Wide Applications] Suitable for various applications such as DC12V 24V motors, LED lights, garage door modifications, electric locks, access control systems, car tailgate modifications. Specification: Item Type: DC Motor Control Module Material: ABS Working Voltage: 12-24V DC Module Power Consumption: 0.6W (excluding motor load), standby 0.1W Signal Input: Low level effective, input is the negative of optocoupler. It is considered that there is a signal if voltage is below 2V Response Speed: K1 K2: 20ms, SW1 SW2: 50ms Operating Life: Over 150,000 times Rated Current: 10A (maximum instantaneous current 30A) Remote Control Battery: 1 x 12V 23A 50mAh battery (with battery) How to Use: K1 is the button for forward rotation, and K2 is the button for reverse rotation; SW1 is the limit switch for forward rotation, and SW2 is the limit switch for reverse rotation. 1. Press K1 once to start the motor in the forward direction until SW1 is closed to stop. 2. Press K2 once to start the motor in the reverse direction until SW2 is closed to stop. By using the jumper cap, you can choose between the momentary mode or self locking mode. Momentary Mode: Press and hold the remote control to operate, release to stop. Self Locking Mode: Press the remote control once to start, press it again to stop. PackageList: 1 x DC Motor Control Module 1 x Accessory 1 x Remote Control 1 x Remote Control Battery Package List 1 x DC Motor Control Module 1 x Accessory 1 x Remote Control 1 x Remote Control Battery