Product Name: Pressed into the shaft static installation and removal toolFunction: Dismantle and install the shaft shaft and outer casing.Applicable to a variety of press-in shaft specifications, installation and disassembly as long as this group meets all needs (no bowl press)Some aluminum sleeves are pressed into the middle shaft. When disassembling, there may be a problem that only the middle shaft bearing can be disassembled. Because the force of the tool is on the bearing, the middle shaft of the aluminum sleeve may cause the bearing to come out first, and the aluminum sleeve also I bite on the frame, and the outer side edge of the middle shaft is parallel to the edge of the five-way frame.Because the tool cannot be fixed at the five-way, the static pressure tool cannot be used.Suitable for pressing and disassembling Palin specifications:6805 (25X37X7) Palin6806 (30X42X7) PalinPress-in R92/T86R30 (BB30 to BB24 converter)Static press-in and disassembly of the PF30, bbright, bb386, etc. (Sram's PF30 special center shaft)Can be used for the removal and installation of press-fit center shafts such as bb86, bb30, bb91, bb92, PF30It can remove almost all common hollow threaded shaft bearings and installation and disassembly of bb86, bb30, bb91, bb30 to 24, bb92 and other press-in center shafts.Type: Multifunction ToolsModel: Bicycle Bottom Bracket Toolcolor:SilverMaterial:Aluminum alloy + stainless steelPackage Contents:1 x Bike Road Fixes GearOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.