Description
N84R M5Stack M5StickC PLUS M5 StickC ESP32-PICO IR AXP192 Mini TypeC WiFi LCD IoT Controller Development Kit
N84R M5Stack M5StickC PLUS M5 StickC ESP32-PICO IR AXP192 Mini TypeC WiFi LCD IoT Controller Development Kit
N84R M5Stack M5StickC PLUS M5 StickC ESP32-PICO IR AXP192 Mini TypeC WiFi LCD IoT Controller Development Kit
M5StickC PLUS2 is powered by ESP32-PICO-D4 with Wi-Fi and is an upgrade of the M5StickC with a bigger screen .It is a portable. easy-to-use. open source. IoT development board. This tiny device will enable you to realize your ideas. enrich your creativity. and speed up your IoT prototyping. _x000D_
Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources. such as infrared. RTC. Microphone. LED. IMU. Buttons. PMU.etc_x000D_
_x000D_
Power switch operation:_x000D_
Power on: Press power button for 2 seconds_x000D_
Power off: Press power button for 6 seconds_x000D_
Product Features_x000D_
ESP32-based support Wi-Fi_x000D_
Built-in 6-Axis IMU_x000D_
Red LED_x000D_
IR transmitter_x000D_
Microphone_x000D_
RTC_x000D_
Buttons. LCD(1.14 inch)_x000D_
Built-in Lithium Polymer Battery_x000D_
Extendable Socket_x000D_
Built-in Passive Buzzer_x000D_
Wearable & Wall mounted_x000D_
Compatible with multi-platform development_x000D_
Applications_x000D_
Internet of things terminal controller_x000D_
Wearable devices_x000D_
Stem education product_x000D_
DIY creation_x000D_
ESP32: 240MHz dual core. 600 DMIPS. 520KB SRAM. Wi-Fi_x000D_
Flash Memory: 4MB_x000D_
Power Input: 5V @ 500mA_x000D_
Port: TypeC x 1. GROVE(I2C+I/0+UART) x 1_x000D_
LCD screen:1.14 inch. 135*240 Colorful TFT LCD. ST7789v2_x000D_
Button: Custom button x 2_x000D_
LED: RED LED_x000D_
MEMS: MPU6886_x000D_
Buzzer:built-in buzzer_x000D_
IR: Infrared transmission_x000D_
MIC:SPM1423_x000D_
RTC:BM8563_x000D_
PMU:AXP192_x000D_
Battery: 120 mAh @ 3.7V_x000D_
Antenna: 2.4G 3D Antenna_x000D_
PIN port: G0. G25/G36. G26. G32. G33_x000D_
Operating Temperature: 0C to 60C_x000D_
Tips: The product may be updated constantly .Due To Different Batches. The Actual Product May Have Slight Differences Or Color Differences. Which Does Not Affect Use_x000D_
Colour:Photo Color_x000D_
Material:plastic_x000D_
_x000D_
Package Contents:_x000D_
1 x Graphical Programming Kit_x000D_
_x000D_
Only the above package content. other products are not included._x000D_
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
-
Fruugo ID:
484435378-1005322282
-
EAN:
9358307350993
Product Safety Information
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Product Safety Labels
Safety Warnings:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.