Features ✅【Long service life】: Non-isolated DC power conversion module has long service life. ✅【Stable output】: The high-power output of the boost module is stable and can convert 10-60VDC to 12-97VDC. ✅【97% conversion efficiency】: High-quality conversion efficiency components can provide high conversion efficiency up to 97%. ✅【Smart temperature control】: Features a smart temperature-controlled fan that automatically turns on at approximately 60°C and stops when the temperature drops below 60°C. ✅【Wide range of applications】: used in high-power solar street light drivers, various LED lighting CV drivers, vehicle and mobile equipment power supplies, DIY adjustable CV CC power supplies, solar charging and various battery charging. Specification: Name: 1500W boost constant current module Type: Non-isolated boost module (BOOST) Input voltage: DC10V to 60V Input current: 10V-30V input voltage, maximum current 35A-40A; input voltage 31-60V, maximum current 30A-35A Quiescent current: 15mA (when converting from 12V to 20V, the higher the output voltage, the greater the quiescent current) Output voltage: 12-97V continuously adjustable (cannot be used for voltage reduction) Output current: 22A (related to the input and output voltage difference. The greater the voltage difference, the smaller the output current. Please strengthen heat dissipation when the current exceeds 15A) Constant current range: 0.8‑22A (+/-0.3A) Input reverse protection: Yes (150A power MOS reverse protection) Input low voltage protection: Yes (10V-50V adjustable, self-recovery) Working temperature: ‑40℃ to 85℃ (if the temperature is too high, please enhance heat dissipation) Frequency: 150KHz Conversion efficiency: 92% to 97% (Efficiency is related to input and output voltage, current, and voltage difference. The smaller the difference, the higher the efficiency) Input overcurrent protection: Yes (automatic protection when the input exceeds 40A, and the power supply voltage will not increase) Short circuit protection: Yes (input 60A fuse), please operate carefully and try not to cause a short circuit. Reverse connection protection: Yes ((150A power MOS tube, can be reversed for a long time) Installation method: four 3mm studs Wiring method: terminal block (please use high current copper wire) Output power: Maximum output power = input voltage * 30A (If the input is 12V, the maximum output power =12V*30A=360W) (If the input is 24V, the maximum output power =24V*30A=720W) Weight: 372g / 13.1oz Packing list: 1 x module Notice: Please note that the fan of this product will be sent randomly and make sure you don't mind before ordering. Package List