1IP65 protection, the product can work normally under the seaside, salt and alkali environment and harsh weather conditions. 2The interior is equipped with thunder protection surge (MOV) components, which can protect the lamps from the impact of thunder weather and prolong the service life of the lamps. 3Energy saving, long life, safe and reliable, overload current protection self-recovery fuse, generally used in places where the visibility is low and hopes to automatically turn on the light. 4This photoelectric switch can automatically control the lighting time according to the illumination value of the environment, which is more convenient to use, suitable for street lighting, courtyard lighting, and the like. 5The internal environment illumination automatic detection circuit is provided. When the environmental flow sensitivity changes to a value, it is automatically turned off during the day and automatically turned on at night.Condition: 100% Brand NewItem Type: Photoelectric SwitchMaterial: PCRated Voltage: 120V-277VACVoltage Range: 80V-305VACRated Frequency: 50/60HzSpecified Load: 1000W for Tungsten, 1800VA for BallastPower Consumption: 120V/0.42W 220V/0.8WOn/Off: 1(FC)/ON 4(FC)/OFFAnti-Interference Delay: 20sHigh Power Type, Power Factor: PF1.0 277VAC 0.96Insulation Strength: 3000VAC 1mA 1sDustproof and Waterproof: IP65 (Meets GB4208-2008 IEC60529:2013 standard requirements)Surge Immunity (MOV): 420J/6KV (Meets IEC61000-4-5:2005 standard requirements)EMI Disturbance Voltage: Meets FCC Part 15 Class B QP peak and forAV mean standard requirementsUse Environment: Outdoor, minus -25 to +75Overload Current Protection: Self-recovery fuseRelative Humidity: 99%RHFailure Mode: Fail-ONProduct Size: Approx. 8.2 x 6 cm / 3.2 x 2.4 inWeight: Approx. 123g / 4.3oz.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid 000;};.w-e-text table,.wang-edit-text table{border: 1px solid 000 important;}1 x Photoelectric Switch