No Neutral Smart Light Switch 2 Way LED Dimmer Module for 110V 220V with Remote Control

No Neutral Light Switch 2Way Control Module with Wall Switch and Remote Model: Single fire light switch plus wall switch Code: 1527 Learning Product overview This compact LED dimmer and controller provides twoway control for lighting circuits without requiring a neutral wire. The system includes a receiver control module and a battery powered wall switch that can be paired with up to 10 wall switches and 20 remote controls. It supports toggle operation and is designed for AC 85 to 250 V lighting systems including LED loads up to 150 W. Key benefits No neutral required: Works where a neutral line is not available, simplifying retrofit installations and preserving existing wiring. Flexible control: Twoway toggle mode allows local wall switching and remote operation from up to 50 meters. Supports multiple wall switches and remotes for zone control. Compact receiver: Small receiver size fits into switch boxes or behind fixtures for discreet installation. LED compatible: Designed for 110 V and 220 V installations and suitable for LED dimming up to 150 W. Stable operation: Built with wires and capacitors to improve conversion and dimming stability across a wide voltage range. Main features and specifications Function: No neutral light switch 2way control module, LED controller and dimmer Code: 1527 Learning Mode: Toggle Controllable devices: Up to 10 wall switches and 20 remote controls Remote control type: Wall switch style, remote control operation Remote range: Up to 50 meters Receiver operating voltage: AC 85 to 250 V, 50/60 Hz Maximum load power: 150 W Ports: L and N Receiver size: 42 x 42 x 23 mm Receiver material: Plastic Wall switch size: 86 x 86 x 13 mm (3.39 x 3.39 x 0.51 inches) Wall switch battery: 1 x 27A 12 V battery included Wall switch buttons: 1, 2, or 3 button options Receiving sensitivity: greater than 97dbm Working temperature range: minus 30 to plus 80 degrees Celsius Additional hardware: Includes wires and capacitors for stable dimming Product type: Switch Color: White Size option: 1 W2gang Compatibility and performance Designed for AC mains systems across 85 to 250 V and both 50 Hz and 60 Hz networks, making it suitable for common 110 V and 220 V installations. Intended for LED lighting loads with a maximum power of 150 W; ensure total connected load does not exceed this value. Receiver connects via live and neutral ports labeled L and N. The wall switch is battery powered and communicates wirelessly to the receiver in toggle mode. Learning code 1527 is used for pairing wall switches and remotes. Installation and operation notes Receiver is small enough to sit behind a wall switch or inside a junction box. Observe local electrical codes and disconnect mains power before installation. The module includes wiring and capacitors required for operation in no neutral installations. Toggle mode means each press changes the output state according to the paired configuration. Wall switch requires one 27A 12 V battery, which is included. Choose 1, 2, or 3 button wall switch models as needed for single or grouped control. Supports multipoint control using up to 10 wall switches and 20 remote controls per receiver, allowing flexible group and zone arrangements. Practical applications Living room lighting: Retrofit existing switch circuits to add dimming and remote control for ambient lighting without running a neutral to the switch location. Bedroom or stairway: Configure twoway control so lights can be switched from multiple positions and dimmed from a wall switch or remote for convenience. Small commercial or common areas: Use multiple paired wall switches or remotes to manage zone lighting in conference rooms, hallways, or display areas where a compact receiver can be hidden behind fixtures. What you receive Receiver control module sized 42 x 42 x 23 mm Battery powered wall switch sized 86 x 86 x 13 mm with 27A 12 V battery included Wiring and onboard capacitors installed in the receiver Model identification Code 1527 Learning Safety and compatibility reminders Verify total connected lamp wattage does not exceed the 150 W maximum load rating. Confirm mains voltage compatibility with the stated AC 85 to 250 V, 50/60 Hz range before installation. Follow local electrical regulations and, if unsure, consult a qualified electrician for installation and wiring.