Features: 1. 11/16inch thread , easy to operate and use. 2. Brass head filter core, good filtering effect. 3. O-rings are of superior quality and good sealing. 4. Replace OE number for reference is 35-60494-1. 5. Exquisite workmanship, stable performance and high reliability. Specification: Condition: Brand New Item Type: Water Oil Separator 10microns Media Filter Thread Type / Size: For Mercury thread 11/16inch 16 T. P. I OE: 35-60494-1 Fitment: Universal Package List: 1 x Separator 2 x Screw 2 x Nut Note: Water drainage or replacement of the part is determined by the level of fuel contamination. Inspect the collection container for water every day and the service you need. Replace the part at least once a year or when a decrease in power is noticed. To Drain The Water: 1. Loosen the automatic ventilation drain plug to drain the water from the container into a container. 2. Squeeze the drain. 3. Use the primer bulb to refill the filter with fuel. 4. Start the engine and check for leaks. To Replace Item: 1. Loosen the automatic ventilation drain plug and drain the item into a container. 2. Remove the filter part from the mounting bracket with the bowl connected. 3. Remove the bowl from the filter part and clean the o-ring gland in the bowl. The bowl is reusable do not discard it. 4. Lubricate o-ring with oil or grease and install in the bowl. 5. Install the bowl on a new part, hand tighten. 6. upper filter seal lubricated with oil or grease. 7. The filler / bowl filter is attached to the clean fuel and assembled with mounting bracket, hand tightened. 8. Start the engine and check for leaks. .