3D Printer Accessories: Includes assembled bambu end p1s end kit parts: heat sink block, high precision 0.6mm nozzle, connectors, throat tube heatbreak, heater block, silicone sock, cartridge heater and thermistor for smoother printing and better 3D printed models.Support High Speed Printing: Semi-assembled P1P/P1S 0.6mm end end with all-metal throat and cartridge heater design makes the print head heated evenly and the filament flows smoothly in the throat nozzle to support high speed printing. And produced by a rigorous design and testing team, no leakage and clogging.Material Advantages: The 0.6mm hardened steel nozzle, through heat treatment or alloying processes, enhances its hardness, resulting in a wear resistance that is 2-7 times greater than that of ordinary steel nozzles.Hardened Steel Nozzle: The maximum working temperature of hardened steel nozzle can reach 500-650 ℃, much higher than stainless steel (350 ℃) and brass (300 ℃), and supports printing of high-temperature filaments, such as PEEK and PEI.Warm Note: We kindly suggest you please check whether each part is tightened before use, because the assembled 0.6mm P1P/P1S end kit will be loosened during transportation. Then after installing this end print head kit, we suggest you to re-level the heat bed.Color: As ShownMaterial: MetalPackage Contents:1*P1P end KitOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.