PCIe to Gigabit Ethernet and M.2 adapter board for Raspberry Pi 5. Enables NVMe M.2 SSDs via NVMe protocol for high speed read/write and efficient operation. NVMe SSD support - Compatible with M.2 SSDs in 2230 / 2242 / 2260 / 2280 sizes. - Gen2 standard supported; boot Raspberry Pi 5 from SSD is supported. Network extension - Extends 1x Gigabit Ethernet port using RTL8111H high‑performance Ethernet chip. - PCI-E x1 Gen2 mode; connects to Pi 5 via 16PIN Cable, based on the 16PIN PCIe interface of Pi 5. Power and health monitoring - Onboard power monitoring chip and EEPROM. - Real-time monitoring of SSD power status for more stable operation. Indicators and status - Onboard indicator lights: PWR is continuously lit when powered on; ACT blinks during read and write operations. - Network port indicators: green light blinks for Gigabit network port; yellow light blinks for 100 Gigabit network port. - Dual LED indicators help quick status checks along with SSD power health. Key benefits - Faster OS and application performance by booting from and running on NVMe SSDs. - Clear separation of OS/data storage with reliable power and health monitoring. - Simple integration with Raspberry Pi 5 using the 16PIN PCIe interface and a standard 16PIN cable. Use scenarios - Turn a Raspberry Pi 5 into a fast home server or NAS with OS on NVMe SSD. - Use as a high-speed cache or data capture station for edge computing or IoT deployments. - Build a compact media server or caching box that benefits from rapid SSD I/O without extra cables.