Explanation:Material: circuit boardColor as shownBoard size: 5.2 cm* 3.6cm *0.3cmBoard weight: 7.5g (includes 11g)2oz copper, 4-layers & 1.6mm PCBBuilt-in XT60 SocketLight and durable for intensive usageQuick & Easy Installation 6 pairs ESC solder tabs are fit for H or X type 5V & 12V Output LED indicators & Short circuit tolerant General:Input voltage range (3S-4S operation): 9-18V DCRegulated outputs: 5V and 12V outputs ESC outputs:Continuous current: 25A*4 or 15A*6 current (10 seconds/): 30A*4 or 20A*6 BEC 5V output:Designed for: RC Receivers, Flight controllers, OSD, and ServosBEC Mode: LinearVoltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps (Max.2.5A 10s/)Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)Short-circuit tolerant: 5 seconds/ BEC 12V output:Designed for: Video TX or FPV camera with linear regulatorBEC Mode: LinearSuggested battery: 4S (13~18V DC)Voltage: 12.0 +/- 0.3VDCContinuous current: 500mA (Max.0.8A 5s/)Short-circuit tolerant: 2 seconds/Package Contents:1 * PDB Board1 * XT60 Connector1.The PDB-XT60 has been engineered to the highest performance and reliability in a 36*52mm & 4 layers PCB.2.It distributes power from a pack to 6 ESCs, as as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, , etc.3.The PDB-XT60 offers a Authentic XT60 plug to connect the pack conveniently.4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;5.This board makes the wiring , with the of having the XT60 option. Stacked right on top of the CC3D with plenty of room.