Item Type: Laser HeadModel: CMK-54XTType: CD player accessoriesUses: Used for Pioneer UK5 etc.Laser Head Installation Knowledge: When the laser head is shipped from the factory, in order to prevent electromagnetic interference, it is generally equipped with a protective solder joint (a larger solder joint on the bald circuit board or on the flexible cable). Before installing the bald head, solder it with a soldering iron. , Otherwise the laser head will not be able to work normally. There is an anti-static high-grade soldering iron that can be opened directly when in use. Special attention should be paid to ordinary soldering irons. First turn on the soldering iron. When the soldering iron reaches the temperature that can melt the tin, remember to unplug the soldering iron. Then, turn on the protection point of the laser head to prevent the static electricity of the ordinary soldering iron from burning the laser head. At the same time, the protective tin point must be cleaned to avoid affecting the reading effect.1CD player flip laser head, the original disassembled laser head, used for Pioneer UK5 etc. 2The test of the product on the machine is normal, and the CD can be read well. 3The structure is simple and the product is relatively easy to assemble, which has high stability and fast transmission speed. 4Small size, easy to carry and store, convenient to use and with good performance. 5Strict quality control and quality assurance, high safety factor, can be used with peace of mind.1 x Laser Head