Easy to use, just keep 5-6cm away from your amazing work and heat it at an angle of about 45 degrees until it's done< /p> With ABS material outside and stainless steel inside, this hot air gun is simple and more durable. The hand part is plastic High quality ABS with diamond patterns which provides secure grip with small energy. The temperature cannot be adjusted, but it can reach around 200C / 390F in a few seconds in an abstract way, which heats up quickly and works like a charm The mini heat gun is a perfect tool for DIY jobs. It can be used for embossing powder, heat shrink wrap, clay, bump, rubber stamp, quick-dry paint, glue, catalytic bonding, quick thaw, shrink PVC for painting. #39;wrapping, creating seal wax patterns, handmade soap or candle. How to use the heat tools: 1. Plug in the heat tool. 2. Maintain the product distance of at least 6 cm with the hot nozzle. Do not place it close to the nozzle. 3. Don't compare it with the industrial hot air gun. This is for a small craft project. 4. Do not use more than 3 minutes continuously in my experience as the nozzle is extremely hot. should cool 1-2 minutes after that. 5. Turn it off when not in use. Safety Precautions: 1. Do not use it outdoors and keep it away from children 2. Do not touch with water 3. Overheating can damage the product. Versatile heat gun tool. Especially useful with the application of polymerizable polymer clay, dries paints, glues and inks quickly. Suitable for shrink plastic, paper, wood, fabric and more. There is a built-in stand for self-support, lightweight and easy to use for precise application. Size: as shown Note: due to difference Due to the light and screen settings, the color of the product may be slightly different from the image. As the manual measurement is different, please allow a slight size difference. Shipping Quantity: 1 Piece