Characteristic: The binding machine weighs only 0.67 kg, which is very convenient to take. One tying machine can save 3 efforts It is labor-saving and can tie handmade plants 3-4 times in one unit time. Time saving: saving time and labor. When the farmers are busy planting, we can have more time to do other things such as watering. And due to its high efficiency, we can also increase the area of the plant. Steps: 1. Hold the handle and press firmly until you hear a da sound. The tape is caught by the hook, loosen the handle to remove the tape and be careful not to use excessive force. 2. The branches of the crop should be tied with wire and other materials, tie them together with tape, and then press the handle quickly and hard. 3. Once the tape is cut, the handle must be released quickly to eject the extra small tape. 4. Note: The strap should be parallel to the nail groove. Maintenance: 1. If the blade strapping machine cannot cut the belt, please use a long flat nose pliers to remove the used blade and replace it with a new blade. 2. When the hand tie machine is stuck, use pliers or a small screwdriver to remove it. (If a segment is broken into two segments, we can also use them one by one to avoid being blocked.) 3. After using the strapping machine for a long time, add lubricating oil to each joint. Important note: attach the machine to branches without straps or nails