Description
Features
Technical Parameters: Measuring output :PM2.5, PM10, Range: PM2.5: 0.0 999.9μg/m3PM10: 0.0-1999.9μg/m3, Rated voltage: 5V, Rated current: 70mA±10mA, Sleep current:<4mA
Temperature and Humidity Range: Storage environment: -20℃ ~ +60℃,operation environment: -10℃~ +50℃.Humidity range: Storage environment: Max.90%,operation environment: Max.70%
Interface specification: 1umPM2.5: 0-999 PWM Output, 5V 5V power input, 2.5μm PM10: 0-999 PWM Output, R Serial port receiver RX, TTL level @ 3.3V,T Serial port transmission TX, TTL level @ 3.3V.
Communication protocol:Serial communication protocol: 9600 8N1. (Rate of 9600, data bits 8, parity none, stop bits 1), Serial report communication cycle: 1+0.5 seconds, Data frame (10 bytes): message header + order+ data(6 bytes) + checksum + message trailer
PM2.5/10 data content: PM2.5 data content: PM2.5 (um/m3) = ((PM2.5 high byte*256 ) + PM2.5 low byte)/10, PM10 data content: PM10 (um/m3) = ((PM10 high byte*256 ) + PM10 low byte)/10.Checksum: data 1 + data 2 + ...+ data 6
Features:
Accurate and Reliable: laser detection, stable, good consistency.
Quick response: data update frequency 1Hz.
Easy integration: serial output, built-in fan.
High resolution: resolution of 0.3ug/m3.
Convenient use, easy installation, and small volume.
Specifications:
Material: Plastic
Condition: 100% brand new and high quality
Weight: 60g
1.Working atmosphere pressure 86KPa ~ 110KPa
2.Response time 1s
3.Serial data output frequency 1Hz
4.Min. particle diameter resolution Less than 0.3um
5.Counting efficiency: 70%@0.3μm, 98%@0.5μm
6.Relative error ±15% and ±10μg/m3 maximum(25℃, 50%RH)
7.Power supply voltage 4.7~5.3V
8.Power supply power
≥1W(current > 200mA)
9.Power supply voltage ripple <20mV
10.Product size Approx. 70 x 70 x 22mm / 2.75 x 2.75 x 0.86inch
The number of bytes Name Content 0 message header AA 1 order C0 2 data 1 PM2.5 low byte 3 data 2 PM2.5 high byte 4 data 3 PM10 low byte 5 data 4 PM10 high byte 6 data 5 ID byte 1 7 data 6 ID byte 2 8 checksum checksum 9 message trailer AB
The low byte and high byte of SN are the last four of the bar code on the sensor.
PWM output:
Output range: PM2.5: 0-999μg/m3, PM10: 0-999μg/m3
Cycle: 1004ms +1%
High level output in start cycle: 2ms
Middle cycle: 1000ms +1%
Low level output in end cycle: 2ms
Package List
1 x Laser Dust Sensor
1 x USB To TTL Module
1 x Cable
Package List
-
Fruugo ID:
405271049-859727612
-
EAN:
9789622012905
Product Safety Information
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Product Safety Labels
Safety Warnings:
Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Ingredients:
As shown in the figure
Delivery & Returns
Dispatched within 2 days
Shipping from China.
We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy