Feature:1. All 8 ports support IEEE 802.3af/at POE standard power supply, and the maximum POE output power of the whole machine is 150W2. Power and data can be transmitted simultaneously for IP Camera and IP phone through ordinary class 5 twisted pair3. Recoverability, in case of network turbulence or equipment failure, restart (fault recovery) time10s. Normal operation, it is used in the environment of 10 ~ 45 , and the service life of the product is more than 3 years4. Eight 100 / 1000Mbps adaptive RJ45 ports, two 10 / 100 / 1000Mbps adaptive RJ45 ports and two multiplexed optical fiber module expansion slots are provided. All ports have line speed forwarding capability and rich port forms, allowing users to seamlessly connect to various networks5. Advanced POE energy saving chip is adopted. When there is no data and power transmission, the interface will automatically turn to energy saving state to minimize power consumption and reduce operation costSpecification:Item Type: POE SwitchMaterial: Aluminum AlloyPower Output Pin: Mode-A 1,2(+)/3,6(-)10 / 100Mbps Interface: 8x 10/100/1000 Base-Tx RJ45 Auto-MDI/MDI-X ports1000Mbps Interface: 2x10/100/1000Mbps RJ45 Auto-MDI/MDI-X portsSFP:2x1000Base-SX/LXSwitch Fabric: 20 Gbps / Non BlockingSwitch Architecture: Store and ForwardSwitch Throughput: 14.88Mpps at 64BytesAddress Table: 8K EntriesFlow Control: Back Pressure for Half Duplex; IEEE 802.3x Pause Frame for Full DuplexStandard: IEEE 802.3: 10BASE-T IEEE 802.3u100BASE-TX IEEE 802.3z1000BASE-SX/LXIEEE 802.3ab1000BASE-T IEEE 802.3af: Power over EthernetIEEE 802.3at:Power over EthernetPOE Standard: IEEE 802.3af , IEEE802.3atVoltage: 100-240V.Package List:1 x POE Switch 1 x User Manual1 x Power Line4 x Foot Pad Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.