<p>Instructions: 1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness).</p> <p>2. Tear off the adhesive on the base of the magnetic sticker and on the hot bed platform, pay attention to be flat and do not leave air .</p> <p>3. Adsorb the PEI side or the PEO side spring steel plate on the magnetic base.(PEO have a film ,please tear off the film before use )</p> <p>4. Start printing, the temperature of the hot bed can be set to 60\u00B0C-70\u00B0C according to the actual situation (do not exceed 70\u00B0C).</p> <p>5. when the temperature drops to room temperature, the printing and bend it gently to achieve easy demoulding.</p> <p>Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!</p> <p>Size: 309mm</p> <p>Comopatible with : For V400, Super Racer</p> <p>type: A Without magnetic base</p> <p>Material: steel</p> <p>colour: As shown</p> <p>Package Contents:</p> <p>1 x Build Plate</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>