privacy film for glass windows,window film privacy,window film,frosted window film,window films,window privacy film,privacy film,window privacy film self adhesive,privacy window film self adhesive No glue ,environment firendlyTo reduce chemical release,Window privacy film comes with Glue- coating, and it is self adhesive by static cling.Due to no glue,the privacy window film can be reused many times and removed without any ugly glue marks on your window .Moreover, it is easy to apply,water is the only tool you need( more water , stronger adhesive.) Enough privacy, enough safetyFrosted glass film self adhesive block the troublesome views while still let the light go through your room. Nobody can see through the glass,protect your privacy and provide you enough safey. With the constant light transmission, the light can still go through your room. You can still enjoy enough light even in the cloudy day. Economical and use it on any flat glassWindow stickers is an inexpensive ,easier and classic alternative to the blinds and heavy curtains.Idealy using our glass frosting film for any Places with smooth and clean glass surface.(Suggest to use frost window film for office, bedroom and living room and White glass film for the bathroom). Enjoy the sunlight lyNow you can enjoy the direct sun without worrying the harmful UV rays. Our privacy film blocks moderate glares and 96% harmful UV rays, but still allow soft light go through your room and protecting your skin and eyes from harmful radiation and reducing fading and ageing of furniture.Furthermore, opaque window film keep your room cool in summer and warm in winter. TIPS1.Spray a lot water on both film and glass. The best Situation is completely wet film 2.Our smart customers choice: matte (frosted) film for office, bedroom and living room while white film for bathroom. 3. contact us for more technique support or serivce at any time. @Sun protection.Window film reduces 96% of all UV rays, which is very eye and skin friendly. @User friendly. The opaque window film has no adhesive coating on the back, thus no release of chemical. It can be removed without residue, holds by static adhesion, can be installed in a few minutes and can be used several times. @Privacy specialist.Fine structure with constant light flow. The matte film creates privacy and blocks unwanted insights. @Practical. Easy to cut in all sizes to meet your needs. Can be used on all smooth and clean glass surfaces(sliding doors, kitchen cabinets, mirrors) in the bathroom, balcony, living room, bedroom, office, etc. Installation Instructions 1.Clean glass thoroughly 2. Measure and cut the film with an additional section that is 2-3 cm larger 3. Remove the plastic surface and wet the adhesive surface of the film (the best situation is completely wet. Soapy water is much better, 2-3 drops per 500 ml) 4. Apply the foil on glass. Start from above. 5. Squeegee out air bubbles or bumps with a squeegee or card 6. Cut off the excess film from the edge of the frame, making sure the film is 1 cm smaller than the window. Tips 1. Use a hair dryer or place the film in warm water to soften the film in cold weather. 2. Slightly soapy water makes it much easier to find the right position of the privacy film on the window. 3.If you want to remove the film, simply loosen the film at one corner and pull it off completely. It leaves no residue.