PSDF1 Shear Beam Load Cell 500kg Accuracy Force Sensor for Industrial Weighing

PSDF1 Shear Beam Load Cell Force Sensor Overview The PSDF1 is an Ftype shear beam load cell designed to convert applied force into a precise electrical signal for weighing and force measurement systems. Available capacities cover a wide range from 100 kg up to 3000 kg, making this sensor suitable for many industrial measurement tasks. Key benefits Accurate and repeatable output for reliable measurements: rated output 2.0 plus or minus 0.004 mV/V with accuracy class C2. Stable longterm performance: low nonlinearity, hysteresis, and creep all specified at 0.03 percent full scale. Wide compatibility with instrumentation: operates from a 5 to 15 V excitation supply and presents standard input and output resistances for common bridge amplifiers. Overload protection margin: safe overload specified at 150 percent full scale to reduce risk of damage from occasional overloads. Flexible capacity options: choose from 100, 200, 300, 500, 1000, 2000, and 3000 kg to match application needs. Key specifications Model: PSDF1 Type: Ftype shear beam load cell / force sensor Available capacities: 100, 200, 300, 500, 1000, 2000, 3000 kg (rated load up to 3000 kg) Power supply (excitation): 5 to 15 V Rated output: 2.0 plus or minus 0.004 mV/V Accuracy class: C2 Nonlinearity: 0.03 percent full scale Hysteresis: 0.03 percent full scale Creep in 30 minutes: 0.03 percent full scale Temperature effect on span: 0.015 percent full scale per 10 C Zero balance: plus or minus 1 percent full scale Input resistance: 380 plus or minus 20 ohm Output resistance: 350 plus or minus 5 ohm Safe overload: 150 percent full scale Performance and compatibility The PSDF1 produces an mV per volt output proportional to applied load and requires a stable excitation voltage between 5 and 15 V. Standard bridge resistances allow straightforward connection to common junction boxes, amplifiers, and weighing indicators that accept mV/V signals. Temperature effect and zero balance specifications help when calibrating systems that operate across changing ambient conditions. Typical applications Industrial and commercial weighing: platform scales, bench scales, and floor scales where mid to capacities are required. Hopper, tank, and silo weighing: shear beam arrangement provides reliable support and accurate load sensing for bulk material measurement. Test stands and production force measurement: suitable for material testing rigs and manufacturing process monitoring that require repeatable force data. Installation notes Use compatible mounting hardware and follow recommended load introduction to preserve accuracy. Ensure excitation voltage falls within the 5 to 15 V range and allow the system to stabilize before taking measurements. Do not exceed the specified safe overload of 150 percent full scale to avoid permanent damage. Package Sold as one piece PSDF1 shear beam load cell in the selected capacity. This PSDF1 load cell provides a clear specification set for engineers and technicians seeking a robust shear beam sensor with predictable metrological behavior and broad application compatibility.