Feature: 1. Rubber Tool: Made of rubber material, with the features of good air tightness, temperature resistance and anti aging, greatly improving the service life. 2. Powerful Tool: Rubber tire inner tube can effectively absorb the impact of bumpy road, ensuring comfortable riding experience and providing a fast and safe driving. 3. Reusable Valve: With extended valve, there is no need to replace the valve core and it can be reused to help inflate the tire quickly,ensuring a satisfying using experience. 4. Easy to Install: The replacement of inner tube for bike tire can be done within a short time, no need for complex operation, will save your time and energy cost. 5. Application Range: Ideal replacement for the original old or damaged part, suitable for electric bikes, motorcycles and tricycles to use. Specification: Item Type: Tire Tube Material: Rubber Color: As Picture Shown Application: for Tricycle, Electric Bike, Scooter Gross Weight: Approx.360g/12.7oz. Package List: 1 x Tire Tube Note: 1. Confirm that the specifications of the inner tube are consistent with the inner tube. Each inner tube is equipped with a valve nozzle and a nut and a rubber cap that can bear the load. Please carefully check whether there is sand in the inner space of the outer tube, whether there are cracks or other adverse factors when the inner tube is installed into the outer tube. 2. When the inner and outer tires are installed on the rim, please check the rim in detail first to ensure that there are no adverse factors on the rim, no deformation, no bending, and no debris. Please use the lining belt to cover the loose and rough strip head or other surfaces that will damage the inner and outer tires. 3. Please tighten the nut carefully with a spanner, do not use some pointed tools. RIMLOCK is recommended for increased safety when the tyre is being used at high speeds as it can damage the inner tube or outer tube lip. 4. When the inner and outer tires have been installed in the ring, please be very careful, do it, the valve nozzle is correctly locked on the ring, and exposed to the ring for air, the inner tube is not clamped between the outer tire and the ring. 5. The inner and outer tires have been installed on the rim, give the inner tire 10PS gas, then stop pumping, and check whether the inner and outer tires are correctly locked on the rim, and then you can press the manufacturer's recommended air pressure (marked on the edge of the tire) punching, the rim line on the tire must be all exposed outside the rim can be seen. 6. Do not pump too full or too little, which will lead to the valve and inner tube fall off, and accidents, please check whether the air pressure is at the normal level, please check the valve to prevent leakage and the valve lock. 7. It is forbidden to store the inner tube together with oil inflammable and chemical corrosion items and keep away from heat source.