Original LCD Screen for Amazfit GTR 3 with Digitizer Full Assembly Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, ensure you are grounded using an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle glass carefully to avoid injury. Tip 2: Simulate testing Screen replacements are fragile. Testing before full installation is strongly recommended. Partially disassemble the device, connect the motherboard to the new LCD/screen assembly and audio cable, then power on to test functionality. If the test is successful, proceed with full installation. If the screen does not display, contact the seller immediately. Do not force installation if issues occur. No responsibility is accepted after the screen has been installed. Tip 3: Avoid cable over-bending Do not bend the LCD cable beyond 90 degrees, as excessive bending may result in a black display. Product Information 1. Replacement LCD screen and touch screen digitizer assembly for Amazfit GTR 3 2. Replace a damaged or non-functional screen with a new unit 3. Restore your device to like-new appearance 4. Designed for precise fit and full functionality 5. Each unit is inspected and confirmed in good condition prior to shipping 6. Professional installation is highly recommended. Seller is not responsible for damage occurring after installation