Rj45 Rj11 Network Lan Usb Cable Tester Remote Test Tools Note: This product does not come with a battery, the battery must be prepared by yourself product description: The dual-purpose multi-function cable tester can test the telephone interface RJ11 and the network RJ45 interface. Connect the cables to be tested to the main tester and the remote tester, respectively, toggle the ON switch for normal test speed, and the S key for slow test. The tested cable is normal, and the numbers of the two test terminals will flash one by one from 1 to 8 at the same time. If the order of the numbers is out of order, it means that the wiring method is wrong or the connection method of the cross wire is wrong. When one of the lights does not light up, that line is not connected properly. If all the lights do not flash, it means that there are more than 4 lines in this cable. Use DC 9V laminated battery, power consumption 25MA Such a lightweight tester, which can be carried around, is an indispensable tool for general network construction and maintenance, and can more effectively and save time to detect cable connection problems. ------------Adopt automatic scanning method, fast test, streamlined shape, ergonomic design. Smooth and concise lines, anti-drop, anti-light design, more in line with on-site construction. index Test cables: BNC, RJ11, RJ45 Power supply: DC 9V laminated battery Power consumption: 25MA 1. Function: 1. Test the twisted pair 1, 2, 3, 4, 5, 6, 7, 8, and G line pairs one by one (pair), and can distinguish which one (pair) is wrong, short circuit and open circuit. 2. The switch ON is the normal test speed, "S" is the slow test speed, and M is the manual gear. 2. Twisted pair test: turn on the power, insert the network cable plugs into the main tester and the remote tester respectively, the main unit indicator lights flash one by one from 1 to G, the following example: Main Tester: 1-2-3-4-5-6-7-8-G Remote Tester: 1-2-3-4-5-6-7-8-G (RJ45) 1-2-3-4-5-6------RJ12 1-2-3-4----------(RJ11) If the wiring is abnormal, it will be displayed as follows: 1. When a network cable such as No. 3 is disconnected, the No. 3 lights of the main tester and the remote test terminal will not light up. 2. When there are several lines that are not connected, the lights will not light up. When the network cable is less than two lines connected, the lights will not light up. 3. When the two network cables are out of order, example 2 and 4 are out of order, the display is as follows: Main tester unchanged: 1-2-3-4-5-6-7-8-G The remote test terminal is: 1-4-3-2-5-6-7-8-G 4. When two network cables are short-circuited, the main tester will not light up, and the two short-circuit lights on the remote test end will be slightly on. If there are more than three (including three) short-circuited, all short-circuited Line number lights are not on. 1. Due to different monitors and lighting effects, the actual color may be slightly different from the image 2. Due to manual measurement, please allow 1-3cm deviation Size: as shown Shipping color: green Quantity shipped: 1