Features MAIN FUNCTION: SA6 is a simple portable spectrum analyzer and signal source designed to display the signal spectrum within the frequency range of 35 to 6200MHz. The analyzer identifies the amplitude and frequency of the spectral components of the analyze MULTIFUNCTIONAL: The spectrum analyzer can process signals from all widely used technologies, such as Wi Fi, 2G, 36, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. ADDITIONAL FUNCTION: Making it possible to measure the frequency response of passive or active devices (such as filters or amplifiers). This software allows for measuring SWR and return loss modules. This requires an external directional coupler and a se MAINLY USED FOR ON SITE OPERATION: The equipment is sturdy and durable, lightweight, and low in energy consumption. Enables the service center and maintenance shop to perform on site analysis for debugging and repair work. In addition, the spectrum analy PERFORM FOLLOWING OPERATIONS: Place an external antenna on the base station, quickly analyze the RF environment, check the correct operation of the relay cell, and repair and adjust relays, generators, filters, etc. Measure SWR when using an external dir Specification: Item Type: Spectrum Analyzer Material: Aluminum Alloy Mode: SA6 Performance Parameters: 3.2in color resistive touch screen Wide Frequency Range: 35 to 6200MHz Fast Scanning of Frequency Range: 500 points per point High Measurement Accuracy: 2dB within the dynamic range of 70 to 75dB Compatibility of for Windows based computers Can use the device with the help of a PC Extremely convenient to use Independent power supply for up to 4 hours of uninterrupted operation, wired data transmission to PC Specifications: Display Frequency Range: 35-6200 MHz Measurement Frequency Range: 35-4500 MHz Dynamic Range of 35-3000 MHz: 75 dB Dynamic Range of 3000-4500 MHz: 70 dB Maximum Span: 6165 MHz Bandwidth: 200 kHz, fixed Scan Speed for Frequencies Above 100MHz: 700MHz/sec Scan 100 MHz: Less than 0.25 seconds Background Noise Up to 3000MHz: Less than -100dBm Background Noise 3000-4500MHz: Less than -95dBm Background Noise 4500-6200 MHz: Less than -90dBm Wave Impedance: 50 ohms Standing Wave Ratio Within the Operating Frequency Range: Less than 1.5 Internal Attenuator: 0-30 dB Error at Attenuation Up to 10 dB: 2 dB 10 to 20 dB Attenuation Error: 5 dB 20 to 30 dB Attenuation Error: 8 dB Tracking Generator Output Power: -15 to -25 dBm Accuracy Within Dynamic Range: 2.0 dBPackage List:1 x Spectrum Analyzer 1 x Resistive Stylus  1 x Type C USB 1M/3.3FT Data Cable 2 x 30CM/11.8in SMA Extension Cable 1 x SMA KK Passed  1 x Manual  Package List 1 x Spectrum Analyzer 1 x Resistive Stylus 1 x Type C USB 1M/3.3FT Data Cable 2 x 30CM/11.8in SMA Extension Cable 1 x SMA KK Passed 1 x Manual