Features 1、 Good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, filling. 2、 Applicable to graphics card North-South bridge, home appliances, high-speed hard drive, micro heat pipe radiator, high-power power supply, LED industry. 3、 Thermally conductive silicone sheet has excellent thermal conductivity to meet the thermal insulation requirements of most electronic products. 4、 The pad is specially designed for the use of heat transfer through the interval, which can fill the interval and effectively transfer the heat of the heat-generating component to the heat sink. 5、 At the same time, the product is sticky and easy to use. The silica gel sheet is made of a flexible silicone thermal conductive material with stable heat conduction, insulation properties, and softness and elasticity. It is placed between the heater and the heat dissipating component to achieve heat transfer and insulation. Specification Item Type:Thermal Conductive Pad Size:200 x 400 x 2mm / 7.87 x 15.75 x 0.08in Color:Blue Thickness Tolerance:0.2+-0.01 Continuous Using Temperature:-50~200℃ Conductivity Coefficient:1.5W/m-k mass resistivity:10^12 Hardness:30±5 Shore A proportion:2.05 tensile strength:15 kg/cm㎡ Extension:48% Flame Retardant Grade:90V-0-1 Users Manual: 1.Clean the surface, it will be glued or cleaned by the surface of the object to remove dust and oil. 2.Tear protective film The left hand picks up the protective film on the side of the product with the right hand, and can not tear the protective film on both sides at the same time, reducing the number and area of direct contact with the silicone sheet to avoid damage to the viscosity and thermal conductivity of the product. 3.Fixed heat sink Remove the protective film from the other side, apply a certain pressure to the heat sink after installation, and then fix it with screws. Package List 1 x Thermal Conductivity Pad