Features 1、This is a normally close proximity switch sensor with 5mm detection distance. 2、When proximity switch is close to some target object, it will send out control signal. 3、It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching. 4、High sensitivity, quick response, stable performance. 5、Non-contact detection avoids the sensor and the target object from damages. Specification Feature: This is a normally close proximity switch sensor with 5mm detection distance. When proximity switch is close to some target object, it will send out control signal. It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching. High sensitivity, quick response, stable performance. Non-contact detection avoids the sensor and the target object from damages. Specification: Model SN04-N2 Detection distance 5mm ± 10% Set distance 0 - 4mm Delay distance <10% Detection distance Standard object Magnetic metal(Detection distance decreases for nonmagnetic metals) Detect object Iron 18*18*1mm Response frequency DC:0.5kHz AC:25Hz Power DC12 - 24V(6-36V); AC110 - 220V(36 - 250V)50/60Hz Withstand voltage AC1000V 50/60Hz Effect of Voltage ±15% Rated voltage, Impulse (P-P) below 10% Consumption current N.P: <13mA, D: <0.8mA, A:<1.7mA Control Output N.P: <300mA, D:<200mA, A:<400mA Circuit protection A: Surge protection N.P.D: Surge protection, Reverse Connection Protection Temperature range -25 -+60℃ Isolation Resistance >50MΩ Material ABS Storage and use temperature -30 - +65℃(No ice, no frost) Storage and use humidity 35 - 95%RH Package list: 1 * Inductive Proximity Switch Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List