SplitCore DC Current Transducer 01000A 25mm Aperture 420mA Output DC24V Isolated Sensor

Current transducer with isolation transformer and flat screw fixation for DC and DCtoDC measurement and signal conversion Key benefits Provides isolated, stable conversion of primary currents to standard control signals for monitoring, control, and data acquisition. Multiple rated currents and primary ranges enable easy compatibility with existing systems and retrofits. Wide auxiliary power options and fast response time support integration with PLCs, meters, and protection relays. Core features and specifications Size: DC 0300A Color: DC 020mA Output Isolation transformer included to improve conversion stability and noise immunity Mounting: flat screw fixation for secure panel or DINrail style installation Original rated current options: 100A, 200A, 500A, 600A, 800A, or customized Primary side measurement range: 100 A to 1000 A Rated output options: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, or customized Auxiliary power options: DC 12 V, DC 24 V, DC 15 V, AC 220 V Carrying capacity: voltage output 5 mA; current output 6 V Frequency bandwidth: DC to 20 kHz Response time: less than 200 ms Temperature drift: 500 ppm per degree Offset voltage: 20 mV Zero output: 0.15 mA Current consumption: 25 mA Quiescent current: less than 10 mA Action current: less than 40 mA Isolation voltage resistance: 2.5 kV at 50 Hz for 1 minute Operating temperature: minus 10 to plus 70 degrees Celsius Storage temperature: minus 25 to plus 85 degrees Celsius Performance and compatibility Outputs available in both current and voltage forms to match common input requirements of controllers, recorders, and analog acquisition modules. Isolation transformer reduces ground loop issues and improves signal integrity in electrically noisy environments. Wide auxiliary power choices make the transducer suitable for DCpowered equipment and AC mains installations. Typical applications Industrial motor monitoring and control: convert large DC currents to 4 to 20 mA signals for PLC inputs or analog controllers. Power distribution and energy monitoring: measure primary currents up to 1000 A and provide isolated outputs to meters and data loggers. Renewable energy and battery systems: integrate with inverters and battery management systems to monitor charging and discharge currents. What to consider when ordering Select the original rated current that matches the conductor and expected load: 100 A, 200 A, 500 A, 600 A, 800 A, or request a customized rating. Choose the output type required by your control equipment: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, or 0 to 10 V. Confirm auxiliary power supply available on site: DC 12 V, DC 15 V, DC 24 V, or AC 220 V. This transducer delivers isolated, configurable currenttosignal conversion with reliable mounting and fast response for industrial and energy applications.