Features BRUSH TO ENSURE NO REMOVAL - The surface is brushed to increase the contact surface with the model to ensure no release during printing. Strong magnetic without falling: magnetic base, with very thick magnets and strong magnetism to ensure that large models can be printed without the platform falling. Handle for convenient removal: Combined with magnetic steel, the mould can be easily taken by gently bending the steel plate, and the handle design is convenient to remove the print surface. Return of the original shape: the first layer is spring steel, which will not deform even if it is bent, but will return to its original shape. Due to its ability to stretch deformation, the product is difficult to permanently deform for humans. Easy to use: Easy to assemble and use. Just clean your building plate well, let it dry, you need to attach the magnetic cover to the building plate and place the flexible steel plate in it. You need to make a 2.5mm spacer. This must be placed under the arm that triggers the Z stop. Specification: Item Type: Magnetic Spring Steel Plate Platform size: approx. 135 x 80 mm/5.31 x 3.15 inches Material: spring steel surface, magnetic rubber plate, resin Applicable models: for Anet N4, for Anycubic, for Photon, for Photon S, for Qidi Shadow 5.5S, SLA and DLP 3D printer Thickness of steel plate: approx. 0.5 mm/0.02 inches Magnetic plate thickness: approx. 1.5mm/0.06" Feature: 1. STRONG ADHERENCE: The magnetic base provides strong magnetism to ensure a perfect fit with the steel plate. The adhesive has high viscosity, good adhesion at low temperature and does not fall easily after gluing with the platform. 2. EASY TO REMOVE: The traditional DLP photocuring printer platform must be removed with tools such as a scraper, while this resin flexible board can be removed by folding. Achieve easier removal of printed models from resin construction surfaces. Package list: 1 x Spring Steel Surface 1 x Magnetic Rubber Sheet Package List 1 x Spring Steel Surface 1 x Magnetic Rubber Sheet